- A table-typed motorized vehicle
- A boom-typed motorized vehicle
- A multipurpose-typed motorized vehicle
A table-typed motorized vehicle
SB-7500
MORE
Features and Performance
A motorized table-type with the divided 4 sections
of the extended working table
The length of the extended working table
3,005mm
The height of a basic working table
860mm
The length of a basic working table
1,390mm
The height of a basic working table
2,690mm
The maximum height available for works 4.5m
860mm
The height of a basic working table
The maximum height available for works
4,490mm
A function of adjusting the level for the front, left and right on the sloped topography
Major functions of product
A smart control system
a touch screen, an emergency mode operation, voice-enabled
Easily operable even by women and the aged
A double-cylinder type
Preventing the working table from shaking by a double-cylinder support
Safe without deformation of a frame
An audio system
A radio and a cigar jack
With a multipurpose compartment, it is convenient upon working.
A low-centered design
With a low-centered design method,
excellent safety upon a function of the left and right level.
Amenities
A non-slip pad and a cushion withstanding the equipment
An EVA cap to prevent rust and foreign materials and a platform brush
A safety device for emergency stop
It guarantees the safety of a worker
since it stops operation upon emergency by the emergency stop button.
A communication system
It is easy to provide a quick customer service
by an alarm and a signal check through communication between controllers.
A LED light
A self-waterproofing function
A super power-saving LED light
An upgraded suspension device
Upgraded to a structure of avoiding leaving the track
minimizing vibration
AC motor installed
A semi-permanent life, preventing it from being pushed back upon stopping a back-piece
Upon illumination, it is possible for a fine control.
An automatic extension of working table
Upon sliding, it is easy for a worker to use
since the subsidiary extended working table is automatically opened.
A remote control system
It is possible for simple and convenient operation
by a separate remote controller.
Optimal safety
Loads distributed on the entire track
Securing excellent safety
Simple and convenient operation
Considering convenience of an operator / With adoption of an easy-operable
joystick, minimizing confusion upon working
Major Specification
| Item | Description |
|---|---|
| Name of Machine | Aerial Lift Truck |
| Type | SB-7500 |
| Dimension(Length X Width X Height) | 2,870 × 1,460 × 1,980 |
| Upon extension of the extended table (mm) | 3,005 |
| Max. ascending height (mm) | 2,690 |
| The height up to the working table upon max. descending (mm) | 860 |
| A horizontal angle of the left, right and the front (˚) | 10 / 10 / 10 |
| Item | Description |
|---|---|
| Weight of Vehicle (kg) | 1,502 |
| Max. Load (kg) | 250 |
| Running Method | Infinite Track Type (driven by a motor) |
| A driving motor type | 48V, 1.6KW |
| An illumination type | A lever type (a joystick) |
| Running Speed (km/h) | 2.4 |
| Type of Hydraulic Device | Hydraulic Power Pack(The highest oil pressure15MPa) |
A video of product
A table-typed motorized vehicle
SB-7500S
MORE
Features and Performance
A motorized table-type with the divided 4 sections
of the extended working table
The length of the extended working table
2,440mm
The height of a basic working table
865mm
The length of a basic working table
1,430mm
The height of a basic working table
2,110mm
The maximum height available for works 3.9m
865mm
The height of a basic working table
The maximum height available for works 3,910mm
A function of adjusting the level for the front, left and right on the sloped topography
Major functions of product
A smart control system
a touch screen, an emergency mode operation, voice-enabled
Easily operable even by women and the aged
A double-cylinder type
Preventing the working table from shaking by a double-cylinder support
Safe without deformation of a frame
An audio system
A radio and a cigar jack
With a multipurpose compartment, it is convenient upon working.
Amenities
A non-slip pad and a cushion withstanding the equipment
An EVA cap to prevent rust and foreign materials and a platform brush
A safety device for emergency stop
It guarantees the safety of a worker
since it stops operation upon emergency by the emergency stop button.
A communication system
It is easy to provide a quick customer service
by an alarm and a signal check through communication between controllers.
A low-centered design
With a low-centered design method,
excellent safety upon a function of the left and right level.
An upgraded suspension device
Upgraded to a structure of avoiding leaving the track
minimizing vibration
An automatic extension of working table
Upon sliding, it is easy for a worker to use
since the subsidiary extended working table is automatically opened.
A remote control system
It is possible for simple and convenient operation
by a separate remote controller.
Optimal safety
Loads distributed on the entire track
Securing excellent safety
Simple and convenient operation
Considering convenience of an operator / With adoption of an easy-operable
joystick, minimizing confusion upon working
Major Specification
| Item | Description |
|---|---|
| Name of Machine | Aerial Lift Truck |
| Type | SB-7500S |
| Dimension(Length X Width X Height) | 2,265 × 1,370 × 1,915 |
| Upon extension of the extended table (mm) | 2,440 |
| Max. ascending height (mm) | 2,110 |
| The height up to the working table upon max. descending (mm) | 865 |
| A horizontal angle of the left, right and the front (˚) | 8 / 8 / 8 |
| Item | Description |
|---|---|
| Weight of Vehicle (kg) | 1,075 |
| Max. Load (kg) | 200 |
| Running Method | Infinite Track Type (driven by a motor) |
| A driving motor type | 48V, 1.6KW |
| An illumination type | A lever type (a joystick) |
| Running Speed (km/h) | 2.4 |
| Type of Hydraulic Device | Hydraulic Power Pack(The highest oil pressure15MPa) |
A table-typed motorized vehicle
SB-7600
MORE
Features and Performance
A motorized table-type with the divided 4 sections
of the extended working table
The length of the extended working table
5,220mm
The height of a basic working table
735mm
The length of a basic working table
1,600mm
The height of a basic working table
2,300mm
The maximum height available for works 4.1m
735mm
The height of a basic working table
The maximum height available for works 4,100mm
A function of adjusting the level for the left and right on the sloped topography
Major functions of product
A smart control system
a touch screen, an emergency mode operation, voice-enabled
Easily operable even by women and the aged
A double-cylinder type
Preventing the working table from shaking by a double-cylinder support
Safe without deformation of a frame
An audio system
A radio and a cigar jack
With a multipurpose compartment, it is convenient upon working.
A low-centered design
With a low-centered design method,
excellent safety upon a function of the left and right level.
Amenities
A non-slip pad and a cushion withstanding the equipment
An EVA cap to prevent rust and foreign materials and a platform brush
A safety device for emergency stop
It guarantees the safety of a worker
since it stops operation upon emergency by the emergency stop button.
A communication system
It is easy to provide a quick customer service
by an alarm and a signal check through communication between controllers.
A LED light
A self-waterproofing function
A super power-saving LED light
An upgraded suspension device
Upgraded to a structure of avoiding leaving the track
minimizing vibration
AC motor installed
A semi-permanent life, preventing it from being pushed back upon stopping a back-piece
Upon illumination, it is possible for a fine control.
An automatic extension of working table
Upon sliding, it is easy for a worker to use
since the subsidiary extended working table is automatically opened.
A remote control system
It is possible for simple and convenient operation
by a separate remote controller.
Optimal safety
Loads distributed on the entire track
Securing excellent safety
Simple and convenient operation
Considering convenience of an operator / With adoption of an easy-operable
joystick, minimizing confusion upon working
Major Specification
| Item | Description |
|---|---|
| Type | SB-7600 |
| Dimension(Length X Width X Height) | 2,690 × 1,850 × 1,575 |
| Upon extension of the extended table (mm) | 5,220 |
| Max. ascending height (mm) | 2,300 |
| The height up to the working table upon max. descending (mm) | 735 |
| A horizontal angle of the left, right and the front (˚) | 10 / 10 / 10 |
| Rotation angle (˚) | 360 degree infinite rotation |
| Item | Description |
|---|---|
| Weight of Vehicle (kg) | 1,570 |
| Max. Load (kg) | 250 |
| Running Method | Infinite Track Type (driven by a motor) |
| A driving motor type | 48V, 1.6KW |
| An illumination type | A lever type (a joystick) |
| Running Speed (km/h) | 2.4 |
| Type of Hydraulic Device | Hydraulic Power Pack(The highest oil pressure15MPa) |
A boom-typed motorized vehicle
SB-8000N
MORE
Features and Performance
The best workability with
infinite rotation of SB8000N_360 degree
The height of a basic working table
3,660mm
The maximum height available for works 5.4m
440mm
1,700mm
The maximum height available for works
5,460mm
A horizontal access work (Width of works 3m)
A horizontal access work
Minimizing damages on fruit trees
Width available for works
3,000mm
A horizontal control device
Left
Right
Front
Rear
Increasing the degree of freedom of works
Reducing vibration of the boarding platform, improving work efficiency
2-step boom
1-step boom
Major functions of product
A smart control system
a touch screen, an emergency mode operation, voice-enabled
Easily operable even by women and the aged
Applying the first 2-joint in the country
Optimizing a working table and accelerating the working speed
Minimizing damages on fruit trees
An audio system
A radio and a cigar jack
With a multipurpose compartment, it is convenient upon working.
A low-centered design
With a low-centered design method,
excellent safety upon a function of the left and right level.
A safety device for emergency stop
It guarantees the safety of a worker
since it stops operation upon emergency by the emergency stop button.
A communication system
It is easy to provide a quick customer service
by an alarm and a signal check through communication between controllers.
A LED light
A self-waterproofing function
A super power-saving LED light
An upgraded suspension device
Upgraded to a structure of avoiding leaving the track
minimizing vibration
AC motor installed
A semi-permanent life, preventing it from being pushed back upon stopping a back-piece
Upon illumination, it is possible for a fine control.
Optimal safety
Loads distributed on the entire track
Securing excellent safety
Simple and convenient operation
Considering convenience of an operator / With adoption of an easy-operable
joystick, minimizing confusion upon working
Major Specification
| Item | Description |
|---|---|
| Type | SB-8000N |
| Dimension(Length X Width X Height) | 2,660 × 1,350 × 1,710 |
| Max. ascending height (mm) | 3,740 |
| The height up to the working table upon max. descending (mm) | 500 |
| A horizontal angle of the left, right and the front, rear (˚) | 10 / 10 / 10 / 10 |
| Rotation angle (˚) | a 140-degree revolution |
| 1-step·2-step angle (˚) | 1-step 70 degrees, 2-step 95 degrees |
| Item | Description |
|---|---|
| Weight of Vehicle (kg) | 1,155 |
| Max. Load (kg) | 100 |
| Running Method | Infinite Track Type (driven by a motor) |
| A driving motor type | 48V, 1.6KW |
| An illumination type | A lever type (a joystick) |
| Running Speed (km/h) | 2.4 |
| Type of Hydraulic Device | Hydraulic Power Pack(The highest oil pressure15MPa) |
A video of product
A boom-typed motorized vehicle
SB-6000S
MORE
Features and Performance
140° left and right rotation
Workable width 6m
The height of a basic working table
3,140mm
The maximum height available for works 5m
380mm
1,470mm
The maximum height available for works
4,940mm
A horizontal access work (Width of works 3m)
A horizontal access work
Minimizing damages on fruit trees
Width available for works
3,000mm
A horizontal control device
Left
Right
Increasing the degree of freedom of works
Reducing vibration of the boarding platform, improving work efficiency
2-step boom
1-step boom
Major functions of product
Applying the first 2-joint in the country
Optimizing a working table and accelerating the working speed
Minimizing damages on fruit trees
An audio system
A radio and a cigar jack
With a multipurpose compartment, it is convenient upon working.
A low-centered design
With a low-centered design method,
excellent safety upon a function of the left and right level.
A safety device for emergency stop
It guarantees the safety of a worker
since it stops operation upon emergency by the emergency stop button.
A communication system
It is easy to provide a quick customer service
by an alarm and a signal check through communication between controllers.
A LED light
A self-waterproofing function
A super power-saving LED light
An upgraded suspension device
Upgraded to a structure of avoiding leaving the track
minimizing vibration
DC motor installed
A semi-permanent life, preventing it from being pushed back upon stopping a back-piece
Upon illumination, it is possible for a fine control.
Optimal safety
Loads distributed on the entire track
Securing excellent safety
Simple and convenient operation
Considering convenience of an operator / With adoption of an easy-operable
joystick, minimizing confusion upon working
Major Specification
| Item | Description |
|---|---|
| Name of Machine | Aerial Lift Truck |
| Type | SB-6000S |
| Dimension(Length X Width X Height) | 2,840 × 1,350 × 1,470 |
| Max. ascending height (mm) | 3,085 |
| The height up to the working table upon max. descending (mm) | 380 |
| A horizontal angle of the left, right (˚) | 10 / 10 |
| 1-step·2-step angle (˚) | 1-step 70 degrees, 2-step 110 degrees |
| Item | Description |
|---|---|
| Weight of Vehicle (kg) | 947 |
| Max. Load (kg) | 100 |
| Running Method | Infinite Track Type (driven by a motor) |
| A driving motor type | 48V, 1.6KW |
| An illumination type | A lever type (a joystick) |
| Running Speed (km/h) | 2.4 |
| Type of Hydraulic Device | Hydraulic Power Pack(The highest oil pressure15MPa) |
A multipurpose-typed motorized vehicle
SB-9000
MORE
Features and Performance
A function of a vehicle for high-place works
Width available for works 2.22m
A length when a working table is attached
1,320mm
The length of the extended working table
2,220mm
The height of a basic working table
2,500mm
A length of the extended working table
520mm
The maximum height available for works 4.3m
The height of a basic working table
1,830mm
Available for works with front-tilted 6 degree and back-tilted 12 degree of a forklift
Major functions of product
A detachable working table
With the detachable working table,
it is possible to extend the working table and to work at a high place.
A low-centered design
With a low-centered design method,
excellent safety upon a function of the left and right level.
A safety device for emergency stop
It guarantees the safety of a worker
since it stops operation upon emergency by the emergency stop button.
A remote control system
It is possible for simple and convenient operation
by a separate remote controller.
A communication system
It is easy to provide a quick customer service
by an alarm and a signal check through communication between controllers.
A LED light
A self-waterproofing function
A super power-saving LED light
An upgraded suspension device
Upgraded to a structure of avoiding leaving the track
minimizing vibration
AC motor installed
A semi-permanent life, preventing it from being pushed back upon stopping a back-piece
Upon illumination, it is possible for a fine control.
Optimal safety
Loads distributed on the entire track
Securing excellent safety
Simple and convenient operation
Considering convenience of an operator / With adoption of an easy-operable
joystick, minimizing confusion upon working
Major Specification
| Item | Description |
|---|---|
| Dimension(Length X Width X Height) | 2,590 × 1,320 × 1,830 |
| Upon extension of the extended table (mm) | 2,220 |
| Max. ascending height (mm) | 2,500 |
| A horizontal angle of the front, rear (˚) | 6 / 12 |
| Type of Hydraulic Device | Hydraulic Power Pack(The highest oil pressure15MPa) |
| Item | Description |
|---|---|
| Weight of Vehicle (kg) | 1,517 |
| Running Method | Infinite Track Type (driven by a motor) |
| A driving motor type | 48V, 1.6KW |
| An illumination type | A lever type (a joystick) |
| Running Speed (km/h) | 2.4 |
A video of product
